BASF ENERTITE® Max High-Yield (Mixed) Open Cell Low-Density Spray Foam Insulation Resin (B-component) - 480 LBS
BASF ENERTITE® Max High-Yield (Mixed) Open Cell Low-Density Spray Foam Insulation Resin (B-component) - 480 LBS
ENERTITE® MAX is a open-cell foam resin that requires pre-mixing, to then be combined with Elastospray 8000A isocyanate to produce a high-quality, low-density open-cell spray polyurethane foam insulation having nominal density of 0.4 to 0.45 pcf. This is a high-yielding lower density open-cell chemistry for enhanced efficiency and optimized preparation time (no preheating required if above 75 deg F).
BASF Open Cell Spray Foam Insulation, 480 lb Net Content, Drum Container, Amber, Composition: Alkyl Halide Phosphate, Alkanolamine, N'-(3-(Dimethylamino)Propyl)-N,N-Dimethylpropane-1,3-Diamine, Hydroxyalkyl Ether, 6 months Shelf Life, 0.42 pcf Density, 150 to 300 cPs Viscosity, Part B Polyol
| Additional Information | : | 50 to 80 deg F Storage Temperature, 6 months Shelf Life, 0.42 pcf Density, 150 to 300 cPs Viscosity |
| Color | : | Amber |
| Composition | : | Part B component (resin / polyol) of spray polyurethane foam (SPF) system, containing water, polyols, catalysts, surfactants, additives and flame retardants to form a low-density SPF insulation when mixed equally by volume with BASF ELASTOSPRAY 8000A Isocyanate. |
| Container Type | : | Drum |
| Net Content | : | 480 lb |
| Style | : | Ultra Low Density .4 pcf Mixed Resin |
| Type | : | Open-cell Low-Density |
- Superior insulation and air sealing
- Non-fibrous
- Sound control
back To Top