BOSS® by Soudal 143142 Extreme Weather Foam Sealant
BOSS® by Soudal 143142 Extreme Weather Foam Sealant
Top of the line, one component, moisture curing polyurethane foam developed especially to perform under difficult freezing temperature conditions where traditional PU foams fail to extrude and cure.
BOSS® by Soudal Extreme Weather Foam Sealant, 24 oz Net Content, Can Container, Aerosol Form, Champagne, Odor/Scent: Characteristic, Composition: 25 to 30% 2-Propanol, 1-chloro-, phosphate (3:1), 10 to 15% Tung oil, 10 to 15% Dimethyl ether, 1 to 5% Propane, 1 to 5% Coploymer, >25% Polymeric diphenylmethane diisocyanate, <10% Isobutane, <1% Morpholine, 4,4'-(oxydi-2,1-ethanediyl)bis-, 8 min Dry Time, 1 hr Functional Cure Time, 12 hr Full Cure Time, 4456 ft Coverage Area, 0.95 Specific Gravity, 201 g/L VOC, -14 to 120 deg F, 8.7 psi Shear Strength, 4.35 psi Compressive Strength, Polyurethane Base, 12 months Shelf Life
| Additional Information | : | 8.7 psi Shear Strength, 4.35 psi Compressive Strength, Polyurethane Base, 12 months Shelf Life |
| Applicable Materials | : | Excellent adhesion on most substrates (except Teflon, PE and PP) |
| Color | : | Champagne |
| Composition | : | 25 to 30% 2-Propanol, 1-chloro-, phosphate (3:1), 10 to 15% Tung oil, 10 to 15% Dimethyl ether, 1 to 5% Propane, 1 to 5% Coploymer, >25% Polymeric diphenylmethane diisocyanate, <10% Isobutane, <1% Morpholine, 4,4'-(oxydi-2,1-ethanediyl)bis- |
| Container Type | : | Can |
| Coverage Area | : | 4456 ft |
| Dry Time | : | 8 min |
| Form | : | Aerosol |
| Full Cure Time | : | 12 hr |
| Functional Cure Time | : | 1 hr |
| Net Content | : | 24 oz |
| Odor/Scent | : | Characteristic |
| Package | : | 24 oz. can |
| Specific Gravity | : | 0.95 |
| Temperature Rating | : | -14 to 120 deg F |
| Unit Height in inches | : | 11.22 |
| Unit Length in inches | : | 2.56 |
| Unit Width in inches | : | 2.56 |
| Unit net wt. in Pounds | : | 1.496 |
| VOC Content | : | 201 g/L |
- AAMA 812-04 approved
- CFC propellant free
- Excellent adhesion on most substrates (except Teflon, PE and PP)
- High thermal and acoustical insulation
- Very good filling capacities
- Excellent mounting capacities
- Excellent stability (no shrink or post expansion)
- Very precise application due to the foam gun system
- AAMA 812-04 approved
- CFC propellant free
- Excellent adhesion on most substrates (except Teflon, PE and PP)
- High thermal and acoustical insulation
- Very good filling capacities
- Excellent mounting capacities
- Excellent stability (no shrink or post expansion)
- Very precise application due to the foam gun system
back To Top