Rigid Board Johns Manville Foil Faced 48"X96"X0.75" 32SF
Rigid Board Johns Manville Foil Faced 48"X96"X0.75" 32SF
Manufacturer: Johns Manville
Brand Name: JM
Part No.: 764636628075
MPN: 90001014
Min. Order Qty: 1
My Branch: Orlando FL
AP™ Foil-Faced Polyiso Foam Continuous Insulation provides maximum efficiency, as well as exceptional moisture, heat and air control. It features a reflective foil facer on one side and a nonreflective facer on the other.
JM Foam Sheathing Insulation Board, 3/4 in Thickness, 4 ft Width, 8 ft Length, Foil Facing, R-Value: R-5, 6 Btu-in/hr-sq-ft-deg F Thermal Conductivity, -100 to 250 deg F, 16 psi Compressive Strength, Flexural Strength: 40 psi, Wall Installation, Polyisocyanurate, White
| Color | : | White |
| Compressive Strength | : | 16 psi |
| Coverage Area | : | 32 sq-ft |
| Facing Type | : | Foil |
| Flexural Strength | : | 40 psi |
| Installation Type | : | Wall |
| Length | : | 8 ft |
| Material | : | Polyisocyanurate |
| R-Value | : | R-5 |
| Temperature Rating | : | -100 to 250 deg F |
| Thermal Conductivity | : | 6 Btu-in/hr-sq-ft-deg F |
| Thickness | : | 3/4 in |
| Width | : | 4 ft |
- Thermal Insulation - inch for inch, polyiso has one of the highest energy efficiencies. R-values for AP Foil-Faced Polyiso Continuous Insulation are shown in Table 1, and physical properties are shown in Table 2 (see reverse). R means resistance to heat flow. The higher the R-value, the greater the insulating power.
- Water-Resistive Barrier - when properly installed as part of a Johns Manville Wall System, AP Foil-Faced Polyiso Continuous Insulation meets the ICC-ES AC71 acceptance criteria for foam plastic sheathing used as a water-resistive barrier. Please see the installation guide for qualifying assemblies and detailed instructions.
- Vapor Barrier - at a minimum thickness of one inch, AP Foil-Faced Polyiso Continuous Insulation has a vapor permeance of 0.05 perms and qualifies as a Class I vapor retarder.
- Air Barrier - when properly installed as part of a Johns Manville Wall System, AP Foil-Faced Polyiso Continuous Insulation meets the Air Barrier Association of America boardstock criteria for materials and assemblies. Please see installation guide for qualifying assemblies and detailed instructions.
- Noncorrosive - does not accelerate corrosion of pipes, wiring or metal studs.
- Lightweight - easy to handle, can be cut with a utility knife or saw.
UOM:
Box
UOM:
Each
UOM:
Box
UOM:
Box
UOM:
Box
UOM:
Box
UOM:
Roll
UOM:
Pair
UOM:
Box
UOM:
Box
UOM:
Roll
UOM:
Each
UOM:
Gallon
back To Top